Skip to content
CANADA FLOORS / Cost

Cost: Before You Start Checklist

Cost: Check thickness, passes, finish, dust and timeline.

Updated 2026-11-22About 3 min
Affiliate disclosure: some outbound links go to commercial partners. We currently pass no tracking parameters, so we earn no commission from them; if that changes, this page will say so.
Quick answer

Cost: Check thickness, passes, finish, dust and timeline. cost depends on area/coats/price.

Why it matters

Cost follows area and coats: a few dollars per square foot, more with stain and finish.

Area.

Step by step

  1. Confirm species and remaining thickness.
  2. Set sanding passes and grit.
  3. Choose finish and confirm cure time.
  4. Plan dust control and schedule.

Common mistakes

  • Sanding through thin veneer.
  • Skipping dust control.
  • Moving furniture back before cure.
  • Ignoring seasonal gaps.

Checklist

  • Species, thickness, passes, finish, timeline.
  • Negative air machine.
  • Hygrometer.
  • Written schedule.

Who it is for

If this is your first Cost, narrow by Area. and Coats. first, then look at specific models.

Key facts

  • Area.
  • Coats.
  • Price.
Cost: five questions at a glance
QuestionShort answer
Cost: Refinish, Patch or ReplaceCost: Compare remaining thickness, damage extent and total cost across the three routes. cost depends on area/coats/price.
Cost: What It CostsCost: Convert sanding, stain and finish into a per-square-foot price. cost depends on area/coats/price.
Cost: Spending LessCost: Save through smaller areas, fewer coats and spot repairs. cost depends on area/coats/price.
Cost: DIY vs ContractorCost: Compare rental cost, timeline and dust risk. cost depends on area/coats/price.

FAQ

Cost: Before You Start Checklist

Cost: Check thickness, passes, finish, dust and timeline. cost depends on area/coats/price.

What should I check before buying a Cost?

cost depends on area/coats/price. Key checks: Area.; Coats..

Is a Cost worth it?

Depends on use, budget and upkeep; a Cost is not automatically better because it costs more.

Source: NRCan / CMHC flooring guidance

Top picks

ProductBest forPrice
PolyurethanePolyLowSee buying guide
Hardwax OilOilMidSee buying guide
Refinishing ContractorContractorHighSee buying guide

Sources